It is applicable to cement slurry systems from fresh water to saturated salt water, significantly improving the density and toughness of cement stone and reducing the permeability of it.

Выберите количество спецификаций

Пожалуйста, проверьте информацию о продукте, который вы хотите!

Объяснительная Лист безопасных

SUMMARY

CT110S anti-channeling agent powder can significantly improve the compactness and toughness of cement stone and reduce the permeability of cement stone.
Suitable for fresh water to saturated salt water systems.
It should be used in conjunction with salt-resistant fluid loss additives when preparing slurry.
Suitable for dry mixing, no special requirements for the water quality of the slurry.
Product dosage range is 1.0-6.0% (BWOC).

PHYSICAL AND CHEMICAL INDICATORS

CT110S

Appearance: grey white powder

Bulk density(g/cm³): 0.60±0.20

Water solubility: insoluble

CEMENT SLURRY PERFORMANCE

Items		Experimental Conditions	Technical Index
Conventional density cement slurry density (g/cm³)		25℃, atmospheric	1.90±0.01
18% concentration salt water system cement slurry system density (g/cm³)
Fluid Loss, ml	18% concentration salt water cement slurry system	90℃, 6.9MPa	≤50
Thickening Properties	Initial consistency, Bc	90℃/49min, 53.3PMa	≤30
	Thickening time, min		≥100, adjustable
Free liquid, %		90℃, atmospheric	0
24h compressive strength, MPa		90℃, 20.7MPa	≥14

STANDARD PACKAGING AND STORAGE

Power product shelf life is 24 months. Packed in 25kg bags, or according to customer requirements.
If the shelf life has expired, it must be inspected and qualified before use.

Keiloil·Global Factory-www.kelioil.com/ru

Part 1: Product Name

Product Name: Salt-resistant anti-gas channeling agent CT110S

Product Application: Oil well cement anti-gas channeling agent

Part 2: Hazard Overview

Physical/chemical hazards: Non-flammable and explosive.

Health hazards: Some irritation to eyes and skin; ingestion may cause irritation to mouth and stomach.

Carcinogenicity: None.

Environmental hazards: Slightly harmful to fish and animals.

Other warnings: None.

Part 3: Ingredients/Composition Information

Main ingredient name Content CAS No.

Rubber powder 70% 9003-55-8

Slag 30% /

Part 4: First aid measures

Skin contact: Remove contaminated clothing and rinse with soapy water and running water.

Eye contact: Lift eyelids and rinse immediately with plenty of running water or saline. Seek medical attention if there are any symptoms of pain or itching.

Ingestion: Drink plenty of warm water and induce vomiting. Seek medical attention if you feel unwell.

Inhalation: Leave the scene to a place with fresh air. If breathing is difficult, seek medical attention.

Special reminder: None.

Part 5: Firefighting measures

Explosive properties: Refer to Part 9 "Physical and chemical properties".

Fire extinguishing agents: Foam, dry powder, carbon dioxide, water mist.

Special fire extinguishing equipment: None.

Part 6: Emergency treatment of leakage

Personal protection measures: Wear appropriate personal protective equipment. See Part 8 "Protective measures".

Leakage: Try to collect the leaked material and clean the leak.

Waste disposal: Bury it in a proper place, or dispose it according to local environmental protection requirements.

Packaging disposal: Transfer to the garbage station for proper disposal.

Part 7: Handling and storage

Handling: Keep the container sealed to avoid contact with skin and eyes. Wear appropriate personal protective equipment.

Storage precautions: It should be kept in a cool and dry place, avoid sunlight and rain, and keep away from heat sources, fire sources and incompatible materials.

Special use: None.

Part 8: Contact control and personal protection

Engineering control: In most cases, good ventilation can achieve the purpose of protection.

Respiratory protection: No respiratory protection is required.

Skin protection: Wear impermeable work clothes and protective gloves.

Eye/lid protection: Wear chemical safety glasses.

Other protection: Smoking, eating and drinking are prohibited at the work site.

Part 9: Physical and chemical properties

Color: grayish white

Bulk density (g/cm3): 0.60±0.20

Properties: powder solid.

Odor: None.

Water solubility: insoluble in water.

Lower explosion limit (standard condition, in air): meaningless.

Volatilization weight loss: no data.

Part 10: Stability and reactivity

Conditions to avoid: open flame, high heat.

Incompatible substances: oxidants.

Hazardous decomposition products: None.

Part 11: Toxicological information

Entry route: contact with skin and eyes, inhalation and ingestion.

Health hazards: It has a certain irritating effect on eyes and skin; ingestion can irritate the mouth and stomach.

Accidental ingestion: about 100ml can cause symptoms such as breathing difficulties, convulsions, paralysis, and drowsiness.

Inhalation: Irritating to mucous membranes and upper respiratory tract.

Carcinogenicity: None.

Special reminder: None.

Part 12: Ecological information

Degradability: The substance is not easily biodegradable.

Ecotoxicity: This product is slightly toxic to organisms.

Part 13: Waste disposal

Waste disposal method: Landfill in an appropriate place, or handle in accordance with local environmental protection requirements.

Contaminated packaging: Handled by the unit designated by the environmental management department.

Part 14: Transportation information

This product is not included in the international regulations for the transportation of dangerous goods (IMDG, IATA, ADR/RID).

Packaging Bags.

Part 15: Regulatory information

Regulations on the Safety Management of Hazardous Chemicals

Detailed Rules for the Implementation of Regulations on the Safety Management of Hazardous Chemicals

Classification and Marking of Common Hazardous Chemicals (GB13690-2009)

General Rules for the Storage of Common Hazardous Chemicals (GB15603-1995)

General Technical Requirements for Transport Packaging of Dangerous Goods (GB12463-1990)

Part 16: Other Information

Issuance Date: 05/08/2003.

Revision Date: 09/30/2018.

Recommended Uses and Restrictions on Use: Please refer to other products and/or product application information. This product is for industrial use only.

Нет отзывов

Объяснительная

SUMMARY

CT110S anti-channeling agent powder can significantly improve the compactness and toughness of cement stone and reduce the permeability of cement stone.
Suitable for fresh water to saturated salt water systems.
It should be used in conjunction with salt-resistant fluid loss additives when preparing slurry.
Suitable for dry mixing, no special requirements for the water quality of the slurry.
Product dosage range is 1.0-6.0% (BWOC).

PHYSICAL AND CHEMICAL INDICATORS

CT110S

Appearance: grey white powder

Bulk density(g/cm³): 0.60±0.20

Water solubility: insoluble

CEMENT SLURRY PERFORMANCE

Items		Experimental Conditions	Technical Index
Conventional density cement slurry density (g/cm³)		25℃, atmospheric	1.90±0.01
18% concentration salt water system cement slurry system density (g/cm³)
Fluid Loss, ml	18% concentration salt water cement slurry system	90℃, 6.9MPa	≤50
Thickening Properties	Initial consistency, Bc	90℃/49min, 53.3PMa	≤30
	Thickening time, min		≥100, adjustable
Free liquid, %		90℃, atmospheric	0
24h compressive strength, MPa		90℃, 20.7MPa	≥14

STANDARD PACKAGING AND STORAGE

Power product shelf life is 24 months. Packed in 25kg bags, or according to customer requirements.
If the shelf life has expired, it must be inspected and qualified before use.

Keiloil·Global Factory-www.kelioil.com/ru

Лист безопасных

Part 1: Product Name

Product Name: Salt-resistant anti-gas channeling agent CT110S

Product Application: Oil well cement anti-gas channeling agent

Part 2: Hazard Overview

Physical/chemical hazards: Non-flammable and explosive.

Health hazards: Some irritation to eyes and skin; ingestion may cause irritation to mouth and stomach.

Carcinogenicity: None.

Environmental hazards: Slightly harmful to fish and animals.

Other warnings: None.

Part 3: Ingredients/Composition Information

Main ingredient name Content CAS No.

Rubber powder 70% 9003-55-8

Slag 30% /

Part 4: First aid measures

Skin contact: Remove contaminated clothing and rinse with soapy water and running water.

Eye contact: Lift eyelids and rinse immediately with plenty of running water or saline. Seek medical attention if there are any symptoms of pain or itching.

Ingestion: Drink plenty of warm water and induce vomiting. Seek medical attention if you feel unwell.

Inhalation: Leave the scene to a place with fresh air. If breathing is difficult, seek medical attention.

Special reminder: None.

Part 5: Firefighting measures

Explosive properties: Refer to Part 9 "Physical and chemical properties".

Fire extinguishing agents: Foam, dry powder, carbon dioxide, water mist.

Special fire extinguishing equipment: None.

Part 6: Emergency treatment of leakage

Personal protection measures: Wear appropriate personal protective equipment. See Part 8 "Protective measures".

Leakage: Try to collect the leaked material and clean the leak.

Waste disposal: Bury it in a proper place, or dispose it according to local environmental protection requirements.

Packaging disposal: Transfer to the garbage station for proper disposal.

Part 7: Handling and storage

Handling: Keep the container sealed to avoid contact with skin and eyes. Wear appropriate personal protective equipment.

Storage precautions: It should be kept in a cool and dry place, avoid sunlight and rain, and keep away from heat sources, fire sources and incompatible materials.

Special use: None.

Part 8: Contact control and personal protection

Engineering control: In most cases, good ventilation can achieve the purpose of protection.

Respiratory protection: No respiratory protection is required.

Skin protection: Wear impermeable work clothes and protective gloves.

Eye/lid protection: Wear chemical safety glasses.

Other protection: Smoking, eating and drinking are prohibited at the work site.

Part 9: Physical and chemical properties

Color: grayish white

Bulk density (g/cm3): 0.60±0.20

Properties: powder solid.

Odor: None.

Water solubility: insoluble in water.

Lower explosion limit (standard condition, in air): meaningless.

Volatilization weight loss: no data.

Part 10: Stability and reactivity

Conditions to avoid: open flame, high heat.

Incompatible substances: oxidants.

Hazardous decomposition products: None.

Part 11: Toxicological information

Entry route: contact with skin and eyes, inhalation and ingestion.

Health hazards: It has a certain irritating effect on eyes and skin; ingestion can irritate the mouth and stomach.

Accidental ingestion: about 100ml can cause symptoms such as breathing difficulties, convulsions, paralysis, and drowsiness.

Inhalation: Irritating to mucous membranes and upper respiratory tract.

Carcinogenicity: None.

Special reminder: None.

Part 12: Ecological information

Degradability: The substance is not easily biodegradable.

Ecotoxicity: This product is slightly toxic to organisms.

Part 13: Waste disposal

Waste disposal method: Landfill in an appropriate place, or handle in accordance with local environmental protection requirements.

Contaminated packaging: Handled by the unit designated by the environmental management department.

Part 14: Transportation information

This product is not included in the international regulations for the transportation of dangerous goods (IMDG, IATA, ADR/RID).

Packaging Bags.

Part 15: Regulatory information

Regulations on the Safety Management of Hazardous Chemicals

Detailed Rules for the Implementation of Regulations on the Safety Management of Hazardous Chemicals

Classification and Marking of Common Hazardous Chemicals (GB13690-2009)

General Rules for the Storage of Common Hazardous Chemicals (GB15603-1995)

General Technical Requirements for Transport Packaging of Dangerous Goods (GB12463-1990)

Part 16: Other Information

Issuance Date: 05/08/2003.

Revision Date: 09/30/2018.

Recommended Uses and Restrictions on Use: Please refer to other products and/or product application information. This product is for industrial use only.