English
  • English
  • 中文
  • Русский

Product Details

CT110S Anti-Salt & Anti-Channeling Agent Powder

It is applicable to cement slurry systems from fresh water to saturated salt water, significantly improving the density and toughness of cement stone and reducing the permeability of it.

CT110S Anti-Salt & Anti-Channeling Agent Powder

Select the number of specifications

Please check the product information you want!

Instrucitons MSDS

SUMMARY

> Significantly improve set cement’s compaction, toughness and reduce permeability.

> Applicable mixing water: from fresh water to half-saturated salt water.

> Use with salt-resistant type fluid loss additives.

> Dry mixed and no water quality required.

> Recommended dosage is 1.0-6.0%(BWOC).

PHYSICAL AND CHEMICAL INDICATORS

CT110S

Appearance:Gray powder

Density, g/cm3: 0.60±0.20

Water-Solubility: insoluble


CEMENT SLURRY PERFORMANCE

Item

Test Condition

Technical Indicator

Density of fresh water cement slurry, g/cm3

25℃, Atmospheric Pressure

1.90±0.01

Density of 18% salt water cement slurry, (g/cm3

Fluid loss, ml

18% salt water system

90℃,6.9MPa

≤50

Thickening performance

Initial consistency, Bc

90℃/49min,53.3MPa

≤30

Thickening time, min

≥100,Adjustable

Free fluid, %

90℃,Atmospheric Pressure

0

24h compressive strength, MPa

90℃,20.7MPa

≥14

 

PACKING AND STORAGE

> Used within 24 months after production. Packed in 20kg bag. Customized packages are also available.

> Once expired, it shall be tested before use.


 

Keiloil·Global Factory-www.kelioil.com/en

 

 

 

 

 

 

 


Part 1: Product Name

Product Name: Salt-resistant anti-gas channeling agent CT110S

Product Application: Oil well cement anti-gas channeling agent

Part 2: Hazard Overview

Physical/chemical hazards: Non-flammable and explosive.

Health hazards: Some irritation to eyes and skin; ingestion may cause irritation to mouth and stomach.

Carcinogenicity: None.

Environmental hazards: Slightly harmful to fish and animals.

Other warnings: None.

Part 3: Ingredients/Composition Information

Main ingredient name            Content                CAS No.

     Rubber powder                      70%                  9003-55-8

             Slag                                   30%                         /

Part 4: First aid measures

Skin contact: Remove contaminated clothing and rinse with soapy water and running water.

Eye contact: Lift eyelids and rinse immediately with plenty of running water or saline. Seek medical attention if there are any symptoms of pain or itching.

Ingestion: Drink plenty of warm water and induce vomiting. Seek medical attention if you feel unwell.

Inhalation: Leave the scene to a place with fresh air. If breathing is difficult, seek medical attention.

Special reminder: None.

Part 5: Firefighting measures

Explosive properties: Refer to Part 9 "Physical and chemical properties".

Fire extinguishing agents: Foam, dry powder, carbon dioxide, water mist.

Special fire extinguishing equipment: None.

Part 6: Emergency treatment of leakage

Personal protection measures: Wear appropriate personal protective equipment. See Part 8 "Protective measures".

Leakage: Try to collect the leaked material and clean the leak.

Waste disposal: Bury it in a proper place, or dispose it according to local environmental protection requirements.

Packaging disposal: Transfer to the garbage station for proper disposal.

Part 7: Handling and storage

Handling: Keep the container sealed to avoid contact with skin and eyes. Wear appropriate personal protective equipment.

Storage precautions: It should be kept in a cool and dry place, avoid sunlight and rain, and keep away from heat sources, fire sources and incompatible materials.

Special use: None.

Part 8: Contact control and personal protection

Engineering control: In most cases, good ventilation can achieve the purpose of protection.

Respiratory protection: No respiratory protection is required.

Skin protection: Wear impermeable work clothes and protective gloves.

Eye/lid protection: Wear chemical safety glasses.

Other protection: Smoking, eating and drinking are prohibited at the work site.

Part 9: Physical and chemical properties

Color: grayish white

Bulk density (g/cm3): 0.60±0.20

Properties: powder solid.

Odor: None.

Water solubility: insoluble in water.

Lower explosion limit (standard condition, in air): meaningless.

Volatilization weight loss: no data.

Part 10: Stability and reactivity

Conditions to avoid: open flame, high heat.

Incompatible substances: oxidants.

Hazardous decomposition products: None.

Part 11: Toxicological information

Entry route: contact with skin and eyes, inhalation and ingestion.

Health hazards: It has a certain irritating effect on eyes and skin; ingestion can irritate the mouth and stomach.

Accidental ingestion: about 100ml can cause symptoms such as breathing difficulties, convulsions, paralysis, and drowsiness.

Inhalation: Irritating to mucous membranes and upper respiratory tract.

Carcinogenicity: None.

Special reminder: None.

Part 12: Ecological information

Degradability: The substance is not easily biodegradable.

Ecotoxicity: This product is slightly toxic to organisms.

Part 13: Waste disposal

Waste disposal method: Landfill in an appropriate place, or handle in accordance with local environmental protection requirements.

Contaminated packaging: Handled by the unit designated by the environmental management department.

Part 14: Transportation information

This product is not included in the international regulations for the transportation of dangerous goods (IMDG, IATA, ADR/RID).

Packaging Bags.

Part 15: Regulatory information

Regulations on the Safety Management of Hazardous Chemicals

Detailed Rules for the Implementation of Regulations on the Safety Management of Hazardous Chemicals

Classification and Marking of Common Hazardous Chemicals (GB13690-2009)

General Rules for the Storage of Common Hazardous Chemicals (GB15603-1995)

General Technical Requirements for Transport Packaging of Dangerous Goods (GB12463-1990)

Part 16: Other Information

Issuance Date: 05/08/2003.

Revision Date: 09/30/2018.

Recommended Uses and Restrictions on Use: Please refer to other products and/or product application information. This product is for industrial use only.

 

 

 


No comment

Instrucitons

SUMMARY

> Significantly improve set cement’s compaction, toughness and reduce permeability.

> Applicable mixing water: from fresh water to half-saturated salt water.

> Use with salt-resistant type fluid loss additives.

> Dry mixed and no water quality required.

> Recommended dosage is 1.0-6.0%(BWOC).

PHYSICAL AND CHEMICAL INDICATORS

CT110S

Appearance:Gray powder

Density, g/cm3: 0.60±0.20

Water-Solubility: insoluble


CEMENT SLURRY PERFORMANCE

Item

Test Condition

Technical Indicator

Density of fresh water cement slurry, g/cm3

25℃, Atmospheric Pressure

1.90±0.01

Density of 18% salt water cement slurry, (g/cm3

Fluid loss, ml

18% salt water system

90℃,6.9MPa

≤50

Thickening performance

Initial consistency, Bc

90℃/49min,53.3MPa

≤30

Thickening time, min

≥100,Adjustable

Free fluid, %

90℃,Atmospheric Pressure

0

24h compressive strength, MPa

90℃,20.7MPa

≥14

 

PACKING AND STORAGE

> Used within 24 months after production. Packed in 20kg bag. Customized packages are also available.

> Once expired, it shall be tested before use.


 

Keiloil·Global Factory-www.kelioil.com/en

 

 

 

 

 

 

 


MSDS

Part 1: Product Name

Product Name: Salt-resistant anti-gas channeling agent CT110S

Product Application: Oil well cement anti-gas channeling agent

Part 2: Hazard Overview

Physical/chemical hazards: Non-flammable and explosive.

Health hazards: Some irritation to eyes and skin; ingestion may cause irritation to mouth and stomach.

Carcinogenicity: None.

Environmental hazards: Slightly harmful to fish and animals.

Other warnings: None.

Part 3: Ingredients/Composition Information

Main ingredient name            Content                CAS No.

     Rubber powder                      70%                  9003-55-8

             Slag                                   30%                         /

Part 4: First aid measures

Skin contact: Remove contaminated clothing and rinse with soapy water and running water.

Eye contact: Lift eyelids and rinse immediately with plenty of running water or saline. Seek medical attention if there are any symptoms of pain or itching.

Ingestion: Drink plenty of warm water and induce vomiting. Seek medical attention if you feel unwell.

Inhalation: Leave the scene to a place with fresh air. If breathing is difficult, seek medical attention.

Special reminder: None.

Part 5: Firefighting measures

Explosive properties: Refer to Part 9 "Physical and chemical properties".

Fire extinguishing agents: Foam, dry powder, carbon dioxide, water mist.

Special fire extinguishing equipment: None.

Part 6: Emergency treatment of leakage

Personal protection measures: Wear appropriate personal protective equipment. See Part 8 "Protective measures".

Leakage: Try to collect the leaked material and clean the leak.

Waste disposal: Bury it in a proper place, or dispose it according to local environmental protection requirements.

Packaging disposal: Transfer to the garbage station for proper disposal.

Part 7: Handling and storage

Handling: Keep the container sealed to avoid contact with skin and eyes. Wear appropriate personal protective equipment.

Storage precautions: It should be kept in a cool and dry place, avoid sunlight and rain, and keep away from heat sources, fire sources and incompatible materials.

Special use: None.

Part 8: Contact control and personal protection

Engineering control: In most cases, good ventilation can achieve the purpose of protection.

Respiratory protection: No respiratory protection is required.

Skin protection: Wear impermeable work clothes and protective gloves.

Eye/lid protection: Wear chemical safety glasses.

Other protection: Smoking, eating and drinking are prohibited at the work site.

Part 9: Physical and chemical properties

Color: grayish white

Bulk density (g/cm3): 0.60±0.20

Properties: powder solid.

Odor: None.

Water solubility: insoluble in water.

Lower explosion limit (standard condition, in air): meaningless.

Volatilization weight loss: no data.

Part 10: Stability and reactivity

Conditions to avoid: open flame, high heat.

Incompatible substances: oxidants.

Hazardous decomposition products: None.

Part 11: Toxicological information

Entry route: contact with skin and eyes, inhalation and ingestion.

Health hazards: It has a certain irritating effect on eyes and skin; ingestion can irritate the mouth and stomach.

Accidental ingestion: about 100ml can cause symptoms such as breathing difficulties, convulsions, paralysis, and drowsiness.

Inhalation: Irritating to mucous membranes and upper respiratory tract.

Carcinogenicity: None.

Special reminder: None.

Part 12: Ecological information

Degradability: The substance is not easily biodegradable.

Ecotoxicity: This product is slightly toxic to organisms.

Part 13: Waste disposal

Waste disposal method: Landfill in an appropriate place, or handle in accordance with local environmental protection requirements.

Contaminated packaging: Handled by the unit designated by the environmental management department.

Part 14: Transportation information

This product is not included in the international regulations for the transportation of dangerous goods (IMDG, IATA, ADR/RID).

Packaging Bags.

Part 15: Regulatory information

Regulations on the Safety Management of Hazardous Chemicals

Detailed Rules for the Implementation of Regulations on the Safety Management of Hazardous Chemicals

Classification and Marking of Common Hazardous Chemicals (GB13690-2009)

General Rules for the Storage of Common Hazardous Chemicals (GB15603-1995)

General Technical Requirements for Transport Packaging of Dangerous Goods (GB12463-1990)

Part 16: Other Information

Issuance Date: 05/08/2003.

Revision Date: 09/30/2018.

Recommended Uses and Restrictions on Use: Please refer to other products and/or product application information. This product is for industrial use only.

 

 

 


CT110S Anti-Salt & Anti-Channeling Agent Powder
It is applicable to cement slurry systems from fresh water to saturated salt water, significantly improving the density and toughness of cement stone and reducing the permeability of it.
Long press to look detail
Long by picture save/share

CT110S Anti-Salt & Anti-Channeling Agent Powder

INQUIRY

在线询盘 MORE+
  • 联系人 *

  • 手机 *

  • 描述

  • Submit

  • Security Code
    Refresh the code
    Cancel
    Confirm

Inquiry Content:


You have no items to require

Add Successfully
请双击输入内容...

Related Products

Leave Us a Message

Fill blanks to contact our sales team.

  • Company Name

  • Name

  • Mobile

  • E-mail *

  • Verification Code

  • Message

  • Send

  • Security Code
    Refresh the code
    Cancel
    Confirm
添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了