English
  • English
  • 中文
  • Русский

Product Details

CH210L MT RETARDER LIQUID

It is suitable for medium temperature mines below 90℃ and has obvious retarding effect on cement slurry. By adjusting the dosage of retarder, the thickening time of cement slurry can be adjusted.

CH210L MT RETARDER LIQUID

Select the number of specifications

Please check the product information you want!

Instructions MSDS

SUMMARY 

  • Retarder helps extend the thickening time of cement slurry in order to keep it pumpable, which, therefore, ensures sufficient pumping time for a safe cementing project.
  • Applicable for low-to-moderate temperature system, used below 90℃ (194℉, BHCT).
  • Mixed with water when applied, and water quality is not required.
  • When curing temperature is lower than bottom hole circulating temperature, strength of set cement at top may be affected.
  • The dosage of CH210L increases significantly when applied above temperature of 95℃, strength of set cement at top may be affected. 


PHYSICAL AND CHEMICAL INDICATORS

CH210L

Appearance: Colorless liquid

Bulk Density, g/cm3: 1.10±0.05

Water-Solubility: Soluble


CEMENT SLURRY PERFORMANCE

Item

Test Condition

Technical Indicator

Thickening performance

Initial consistency, Bc

80℃/45min, 46.5MPa

≤30

40-100Bc thickening time, min

≤40

Thickening time adjustability

Adjustable

Sudden change value of consistency, Bc

Normal

Free fluid , %

80℃, Atmospheric Pressure

≤1.4

24h compressive strength, MPa

80℃, 20.7MPa

≥14

Composition: API Class G (HSR) 700g; mixed water 308g (including); defoamer 1.4g (0.2%); CH210L.

Remarks: the dosage of CH210L is determined under the precondition of adjusting the thickening time

range of cement slurry from 130—270 min at 80℃.

 

PACKING AND STORAGE

  • The liquid type products should be used within 12 months after production. Packed in 25kg, 200L and 5 US gallon plastic barrels
  • Customized packages are also available.
  • Once expired, it shall be tested before use.


Keiloil·Global Factory-www.kelioil.com/en

 


Click here to download MSDS

SECTION 1: PRODUCT NAME 

PRODUCT NAME: Moderate temperature retarder CH210L
PRODUCT DESCRIPTION:Oil well cement retarder
SECTION 2: HAZARDS IDENTIFICATION 
CHARACTERISTICS: Nonflammable and inexplosive.
HEALTH HAZARDS: Irritate eye and skin slightly; Cause irritation of the mucosal and upper respiratory tract.
ENVIROMENTAL HAZARDS: Slightly toxic to fish and animal.
SPECIAL ATTENTION: None.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS

INGREDIENT NAME

COMPOSITION

CAS No.

Amino Trimethylene Phosphonic Acid 

10%  

6419-19-8

Ethylenediamine Tetramethylenephosphonic Acid

20%

1429-50-1 

Water 

70%

7732-18-5

SECTION 4: FIRST AID MEASURES

SKIN CONTACT: Put off contaminated clothing, rinse with soapy and clean flowing water.
EYE CONTACT: Raise the eyelid. Rinse it with plenty of clean flowing water and physiological saline. Consult a doctor if irritation occurs.
INGESTION: Drink plenty of water to induce vomiting; If be uncomfortable, consult a doctor please.
INHALATION: Escape to fresh air; If have breathing difficulties, consult a doctor.
SPECIAL ATTENTION: None.
SECTION 5: FIRE-FIGHTING MEASURES 
FLAMMABILITY: See section 9(Physical and Chemical Properties).
FIRE FIGHTING MEDIUM: Foam, dry powder, carbon dioxide, water.  
SPECIAL FIRE-FIGHTING EQUIPMENTS: None.
SECTION 6: ACCIDENTAL RELEASE MEASURES 
PERSONAL PRECATIONALS: Use personal protective equipment recommended in Section 8 (Exposure Controls/Personal Protection).
SPILL: Collect the most of leakage, clean the site of leakage.
WASTE TREATMENT METHODS: Be properly buried or handled according to local environment requirement.
PACKING TREATMENT METHODS: Transferred to the dumping site for proper disposal.
SECTION 7: HANDLING AND STORAGE 
HANDLING: Keep the containers closed when not in use. Do not get in eyes, on skin. Wear proper personal protection.
STORAGE ATTENTION: Stored in a dry cool place, prevented from the sun and rain, kept away from the heat and fire and incompatible materials.
SPECIAL ATTENTION: None.
SECTION 8: ESPOSURE CONTROLS AND PERSONAL PROTECTION 
ENGINEERING CONTROL: Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors or particles below their respective threshold limit value.
RESPIRATORY PROTECTION: Not required.
SKIN PROTECTION: Wear standard protective clothing and gloves.
EYE PROTECTION: Wear chemical splash goggles.
SPECIAL ATTENTION: Smoking, food and water drinking are all forbidden.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 
COLOR: Colorless.
RELATIVE DENSITY (water equal to 1): 1.10±0.05.
RELATIVE VAPOR DENSITY(air equal to1)No data.
PHYSICAL STATE: liquid.
ODOR: Slightly pungent.
WATER SOLUBILITY: Completely soluble in water.
FLASH POINT: No applicable.
LOWER EXPLOSIVE LIMIT (common conditions, in the air): No applicable.
VOLATILIZATION WEIGHT LOSS: No data.
SECTION 10: STABILITY AND REACTIVITY 
AVIOD: Open fire, High temperature.
INCOMPATIBLE MATERIAL: Strong oxidizers.
HAZARDOUS DECOMPOSITION PRODUCTS: None.
SECTION 11: TOXICOLOGICAL INFORMATION 
INVASIVE ROUTE: Skin or eye contact and accidental inhalation or ingestion.
HEALTH HAZARD: Irritate eye and skin slightly; dust will stimulate the respiratory tract; careless ingestion has a stimulating effect on the oral cavity and stomach.
ACCIDENT INGESTION: Swallow 100ml, lead to breath difficulties, convulsions, paralysis, drowsiness, and other symptoms.
ACCIDENT INHALATION: Cause irritation of the Mucosal and upper respiratory tract.
CARCINOGENICITY: None.
SPECIAL REMIND: None.
SECTION 12: ECOLOGICAL INFORMATION 
BIODEGRADABLE: Not available.
ECOTOXICITY: Not available.
SECTION 13: DISPOSAL CONSIDERATIONS
WAST TREATMENT METHOD: Be properly buried or handled according to local environment requirement.
PACKING TREATMENT METHOD: Transferred to the dumping site for proper disposal.
SECTION 14: TRANSPORT INFORMATION 
This product is not included in the dangerous goods transport international regulations(IMDG,IATA,ADR/RID)
PACKAGE        Plastic barrel
SECTION 15: REGULATORY INFORMATION 
The Management Regulations of Dangerous Chemicals Management
The Practical Detailed Rules and Regulation for Dangerous Chemicals Management
The Classification and mark of Common Chemical Products (GB 13690-2009)
The General Rule of Common Chemical Products (GB15603-1995)
The Technology Conditions for the Packing Marks for Hazardous Cargo (GB 12463 -1990)
SECTION 16: OTHER INFORMATION 
RELEASE DATE: 05/08/2003.
REVISION DATE: 09/30/2013.
SUGGEST FOR AND USED RESTRICTIONS: The product is to be used in applications consistent with our product literature. This product is applied to industry only.

 

 

 


No comment

Instructions

SUMMARY 

  • Retarder helps extend the thickening time of cement slurry in order to keep it pumpable, which, therefore, ensures sufficient pumping time for a safe cementing project.
  • Applicable for low-to-moderate temperature system, used below 90℃ (194℉, BHCT).
  • Mixed with water when applied, and water quality is not required.
  • When curing temperature is lower than bottom hole circulating temperature, strength of set cement at top may be affected.
  • The dosage of CH210L increases significantly when applied above temperature of 95℃, strength of set cement at top may be affected. 


PHYSICAL AND CHEMICAL INDICATORS

CH210L

Appearance: Colorless liquid

Bulk Density, g/cm3: 1.10±0.05

Water-Solubility: Soluble


CEMENT SLURRY PERFORMANCE

Item

Test Condition

Technical Indicator

Thickening performance

Initial consistency, Bc

80℃/45min, 46.5MPa

≤30

40-100Bc thickening time, min

≤40

Thickening time adjustability

Adjustable

Sudden change value of consistency, Bc

Normal

Free fluid , %

80℃, Atmospheric Pressure

≤1.4

24h compressive strength, MPa

80℃, 20.7MPa

≥14

Composition: API Class G (HSR) 700g; mixed water 308g (including); defoamer 1.4g (0.2%); CH210L.

Remarks: the dosage of CH210L is determined under the precondition of adjusting the thickening time

range of cement slurry from 130—270 min at 80℃.

 

PACKING AND STORAGE

  • The liquid type products should be used within 12 months after production. Packed in 25kg, 200L and 5 US gallon plastic barrels
  • Customized packages are also available.
  • Once expired, it shall be tested before use.


Keiloil·Global Factory-www.kelioil.com/en

 


MSDS

Click here to download MSDS

SECTION 1: PRODUCT NAME 

PRODUCT NAME: Moderate temperature retarder CH210L
PRODUCT DESCRIPTION:Oil well cement retarder
SECTION 2: HAZARDS IDENTIFICATION 
CHARACTERISTICS: Nonflammable and inexplosive.
HEALTH HAZARDS: Irritate eye and skin slightly; Cause irritation of the mucosal and upper respiratory tract.
ENVIROMENTAL HAZARDS: Slightly toxic to fish and animal.
SPECIAL ATTENTION: None.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS

INGREDIENT NAME

COMPOSITION

CAS No.

Amino Trimethylene Phosphonic Acid 

10%  

6419-19-8

Ethylenediamine Tetramethylenephosphonic Acid

20%

1429-50-1 

Water 

70%

7732-18-5

SECTION 4: FIRST AID MEASURES

SKIN CONTACT: Put off contaminated clothing, rinse with soapy and clean flowing water.
EYE CONTACT: Raise the eyelid. Rinse it with plenty of clean flowing water and physiological saline. Consult a doctor if irritation occurs.
INGESTION: Drink plenty of water to induce vomiting; If be uncomfortable, consult a doctor please.
INHALATION: Escape to fresh air; If have breathing difficulties, consult a doctor.
SPECIAL ATTENTION: None.
SECTION 5: FIRE-FIGHTING MEASURES 
FLAMMABILITY: See section 9(Physical and Chemical Properties).
FIRE FIGHTING MEDIUM: Foam, dry powder, carbon dioxide, water.  
SPECIAL FIRE-FIGHTING EQUIPMENTS: None.
SECTION 6: ACCIDENTAL RELEASE MEASURES 
PERSONAL PRECATIONALS: Use personal protective equipment recommended in Section 8 (Exposure Controls/Personal Protection).
SPILL: Collect the most of leakage, clean the site of leakage.
WASTE TREATMENT METHODS: Be properly buried or handled according to local environment requirement.
PACKING TREATMENT METHODS: Transferred to the dumping site for proper disposal.
SECTION 7: HANDLING AND STORAGE 
HANDLING: Keep the containers closed when not in use. Do not get in eyes, on skin. Wear proper personal protection.
STORAGE ATTENTION: Stored in a dry cool place, prevented from the sun and rain, kept away from the heat and fire and incompatible materials.
SPECIAL ATTENTION: None.
SECTION 8: ESPOSURE CONTROLS AND PERSONAL PROTECTION 
ENGINEERING CONTROL: Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors or particles below their respective threshold limit value.
RESPIRATORY PROTECTION: Not required.
SKIN PROTECTION: Wear standard protective clothing and gloves.
EYE PROTECTION: Wear chemical splash goggles.
SPECIAL ATTENTION: Smoking, food and water drinking are all forbidden.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES 
COLOR: Colorless.
RELATIVE DENSITY (water equal to 1): 1.10±0.05.
RELATIVE VAPOR DENSITY(air equal to1)No data.
PHYSICAL STATE: liquid.
ODOR: Slightly pungent.
WATER SOLUBILITY: Completely soluble in water.
FLASH POINT: No applicable.
LOWER EXPLOSIVE LIMIT (common conditions, in the air): No applicable.
VOLATILIZATION WEIGHT LOSS: No data.
SECTION 10: STABILITY AND REACTIVITY 
AVIOD: Open fire, High temperature.
INCOMPATIBLE MATERIAL: Strong oxidizers.
HAZARDOUS DECOMPOSITION PRODUCTS: None.
SECTION 11: TOXICOLOGICAL INFORMATION 
INVASIVE ROUTE: Skin or eye contact and accidental inhalation or ingestion.
HEALTH HAZARD: Irritate eye and skin slightly; dust will stimulate the respiratory tract; careless ingestion has a stimulating effect on the oral cavity and stomach.
ACCIDENT INGESTION: Swallow 100ml, lead to breath difficulties, convulsions, paralysis, drowsiness, and other symptoms.
ACCIDENT INHALATION: Cause irritation of the Mucosal and upper respiratory tract.
CARCINOGENICITY: None.
SPECIAL REMIND: None.
SECTION 12: ECOLOGICAL INFORMATION 
BIODEGRADABLE: Not available.
ECOTOXICITY: Not available.
SECTION 13: DISPOSAL CONSIDERATIONS
WAST TREATMENT METHOD: Be properly buried or handled according to local environment requirement.
PACKING TREATMENT METHOD: Transferred to the dumping site for proper disposal.
SECTION 14: TRANSPORT INFORMATION 
This product is not included in the dangerous goods transport international regulations(IMDG,IATA,ADR/RID)
PACKAGE        Plastic barrel
SECTION 15: REGULATORY INFORMATION 
The Management Regulations of Dangerous Chemicals Management
The Practical Detailed Rules and Regulation for Dangerous Chemicals Management
The Classification and mark of Common Chemical Products (GB 13690-2009)
The General Rule of Common Chemical Products (GB15603-1995)
The Technology Conditions for the Packing Marks for Hazardous Cargo (GB 12463 -1990)
SECTION 16: OTHER INFORMATION 
RELEASE DATE: 05/08/2003.
REVISION DATE: 09/30/2013.
SUGGEST FOR AND USED RESTRICTIONS: The product is to be used in applications consistent with our product literature. This product is applied to industry only.

 

 

 


CH210L MT RETARDER LIQUID
It is suitable for medium temperature mines below 90℃ and has obvious retarding effect on cement slurry. By adjusting the dosage of retarder, the thickening time of cement slurry can be adjusted.
Long press to look detail
Long by picture save/share

CH210L MT RETARDER LIQUID

INQUIRY

在线询盘 MORE+
  • 联系人 *

  • 手机 *

  • 描述

  • Submit

  • Security Code
    Refresh the code
    Cancel
    Confirm

Inquiry Content:


You have no items to require

Add Successfully
请双击输入内容...

Related Products

Leave Us a Message

Fill blanks to contact our sales team.

  • Company Name

  • Name

  • Mobile

  • E-mail *

  • Verification Code

  • Message

  • Send

  • Security Code
    Refresh the code
    Cancel
    Confirm
添加微信好友,详细了解产品
使用企业微信
“扫一扫”加入群聊
复制成功
添加微信好友,详细了解产品
我知道了